ASME Download - welding documents...

Useful Files

UG-22 - 28 KB

Section VIII, Division 1, UG-22 Loadings Checklist

Gray Shades - 85 KB
Shades of gray eye-test in accordance with SNT-TC 1A add.1998, Para. 8.2(2)

Eye Test Form
Eye Test Certificate - german/english

Material Comparison List 17 KB
Form for documentation of material-recertification

WPS German - English 310 KB (as zip-file 53 KB) of Koenig Consulting, Linkenheim
Form for Welding Procedure Specification, to be filled in according to ASME Section IX

WPQ Form English & German 732 KB (as zip-file 283 KB) courtesy of Koenig Consulting, Linkenheim
Form for Welder Qualification, to be filled in according to ASME Section IX

WPQ Form 600 KB , (SI) courtesy of Koenig Consulting, Linkenheim

WPQ Form 600 KB (U.S. Customary)
Form for Welder Qualification, to be filled in according to ASME Section IX, contains Macros

WOPQ Form 600 KB ,courtesy of Koenig Consulting, Linkenheim
Form for Welder Qualification, to be filled in according to ASME Section IX, contains Macros

Welding Table 118 KB courtesy of Koenig Consulting, Linkenheim
Checklist for WPS and PQR. Can not replace the use of Section IX.

UHX paper 4493 244 KB Addenda 2003 will mandate the new part UHX for heat exchangers. The attached white paper will provide some background information on the design of tubesheets.

Publications

Dampfkessel nach TRD, EN oder ASME - was sagt die DGRL?

Mixen und Mischen 2006 - 83 KB
Mixen und Mischen von Regelwerken bei der Herstellung von Druckgeräten (German)

Freeware / Demos

Fractions - A very useful tool to convert feet, inches and fractions! courtesy of Koenig Consulting, Linkenheim

Convert - A small and very effective unit converter!

Data Reports

Form UD-1 Manufacturer´s Certificate for Conformance fro Rupture Disc Devices

FORM U-1 page 1 page 2 Manufacturer´s Data Report for Pressure Vessels

FORM U-1 add 05 - bar&°C rev1 MDR

FORM U-1 add 05 - US Customary rev1 MDR

Form U-1a Manufacturer´s Certificate for Conformance for Pressure Vessels

Form U-1a - metric or local customary -ed04 A05 rev2

Form U-1a - US Customary -ed04 A05 rev2

Form U-2 Page 1 Page 2 Manufacturer´s Partial Data Report

Form U-2a Manufacturer´s Partial Data Report (Alternative Form)

Form UV-1 Manufacturer´s Certificate of Conformance for Pressure Relief Valves

FormU-3 A03.pdf Manufacturer´s Certificate of Compliance covering Pressure Vessels to be stamped with the UM Symbol

For other Data Reports please go directly to ASME:
Boiler & Pressure Vessel Code Data Report Forms

Please verify for correctness before use and adopt to your needs!

Code Finder

The new service: Code Finder, a question-and-answer portal to help you find the right ASME Code Section!