hydro test

sameer · **Posted:** Sun Oct 23, 2011 3:23 pm

hello all,

please conform by ASME secvlll div-1 as per hydro test requirement, if we are doing multiple vessels hydro test (parallel hydro test with typical vessels)then we need to keep pressure gauge on top per vessel or only two gauge enough, like one for inlet and one for outlet , please give me advice with code reference,

thanks and regards,

Sameer

Gonzaga · **Joined:** Sat Dec 15, 2001 1:00 am **Posts:** 657

sameer wrote:

hello all,

please conform by ASME secvlll div-1 as per hydro test requirement, if we are doing multiple vessels hydro test (parallel hydro test with typical vessels)then we need to keep pressure gauge on top per vessel or only two gauge enough, like one for inlet and one for outlet , please give me advice with code reference,

thanks and regards,

Sameer

Pressure gauge shall be directly connected to the item. I ask always one pressure gauge on top of each item. However there can be different interpretation. Ask your AI
mauro

Rathnam · **Joined:** Fri Jul 09, 2010 7:57 am **Posts:** 79

Code:

UG 102 (a) An indicating gage shall be connected directly to
the vessel. If the indicating gage is not readily visible to
the operator controlling the pressure applied, an additional
indicating gage shall be provided where it will be visible
to the operator throughout the duration of the test.

hydro test

Who is online