AOA all there!
may i ve Technical / Design specifications (detailed) for a pressure vessel being designed and fabricated in accordance with ASME VIII 1, demonstrating all the applicable requirements for design and fabrication, testing, material and examination.
Please anybody help me....
raja687@hotmail.com

_________________
Raja Muhammad Iqbal
Senior Design Engineer,
Heavy Mechanical Complex-3,
Taxila.
rajae312@yahoo.com
+923129111977

Rajae312

Can you be more specific, your problem and your objective?

leem817

AOA!
to be more specific, i want to guide the fabricator to be specific as to achieve the quality of fabrication to achieve the limits of ASME Sec. VIII 1 at eachand every step. i need to prepare that document ,usually called the technical specifications.

_________________
Raja Muhammad Iqbal
Senior Design Engineer,
Heavy Mechanical Complex-3,
Taxila.
rajae312@yahoo.com
+923129111977

AOA!
to be more specific, i want to guide the fabricator to be specific as to achieve the quality of fabrication to achieve the limits of ASME Sec. VIII 1 at eachand every step. i need to prepare that document ,usually called the technical specifications.

rajae312,

What you want from this forum is to help you generate or prepare a Section VIII-1 technical spec.for your client.

Well, I do not think this is the right forum for you. You don't have a specific issue or a problem.

Good luck,
leem817

Leem u r correct but we can help by giving link

Rajae312,

Please follow :

http://www.onetb.com/asme-code-design.htm

Which will give you How to adhear ASME code through out Construction.

By using this you can preapre your own checklist for fabrication.

_________________
Niraj